- Ellen - bar stool

  • The chair is made of plywood and metal.
    Front seat and the legs are connected, that mean's it's manufactured from a single piece by folding, stacking and gluing veneer. Thickness of plywood on the end of seat decreases, but the thickness of the rest of the pieces is sufficient to withstand the average weight of a man.

    Rear leg is made of metal and is 1mm thick. What actually prevents bending legs is that the metal is bent by 90 degrees on the inside, so as to ensure twisting legs in both directions.
    This section also exists in a place where we lean legs.

    Each part is connected with screws.
    In the space between the seat and the rear legs is the rubber part that connects one part of the seat, and the second zone is free, so, in case of bending plywood, rubber will prevent further shearing.
    It is anticipated that the chair is made in two series.

    'Elegance' series - a combination of dark wood finish with 70% gloss with chrome, matte black or matte white feet.
    'Play' series - a combination of light wood with 60% gloss with legs in five colors from Pantone chart.
    As an additional touch, you can set the seat cushion, and production is divided according to these series.
    For 'Elegance' - provided the leather cushion.
    For 'Play' - provided the textile cushion with the same color as legs.